Specifications: 1.components; the first part of paint is made of hydroxy acrylic resins ,pigments, fillers,catalytics etc. while
the second one is are the curing agent. They are supplied in two packages respectively,
according to the specification.
2.charateristics: the paint can dry at room temperature, enjoying ecellent performance of high adhesion,
excellent mechanical properties, gasoline-resistance, weather-durability, water resistance,
anti-mildew and anti-salt spray, anti- hot and humid and so on.
3.functions : It can couple with epoxy primer and is applicable to aviation and other civian industries.
4.thecnical indicates
projects Indicates
Surface of the film smoothy
Smoothy percentage(um) 20
Solid percentage (part one) 45±2%
Flexibility(mm) 1mm
Impact durability (kg/cm2 ) 50
adhesion No more than 2
Time for drying Surface(h) 2
Petrol resistance (5h) No sticky or weak on the film
Steam resistance (72h) No obvious change in the film
Heat durability(150℃,48h) Meet the standard model of color changing
Salt spay resistance (72h) No obvious chang on the film
5.reference for construction:
1.The two parts must be mixed according to the specification and the real demand and should be used within 6hours to avoid waste caused by plasticizing.
2.The surface should be clean and smooth and free from acidity,alkali or moister.
3.In order to fully mixture the two parts ,please heat the mixture under moderate temperature for 10 min before spraying. If it is too viscosity, you should use special thinner to dilute the viscosity properly.The pot life can be reasonablely extended under the the dry environment within 22℃ without heating.
The remaining of part two should be packaged closely and isolated from water petric etc.( because it is sensitive to water acidity and so on) to avoid the waste caused by plasticizin
|