Specifications: 1.components:The pait is made of epoxy,polyurethane epoxy,pigments,fillers,organic solvent etc. as part one
while curing agent as pardt two.These two parts are supplied by two respectively packages.
2.Charateristics:The paint enjoys good adhesion, hardness, good gloss,excellent waterproof, anti moisture ,
anti oil ,anti aid, anti solvent, anti chemicals and fungus resistance.
3.functions:Being supported by polyurethane ,it serves as anticorrosion paint and preservative paint for these
apparatus and equipmentsin humidy or chemical environments.
4.Technical standards:
projects Standards
Color and appearance smooth
Flexibility£¬mm No more than 1
Impact durability kg/©M2 50
adhesion No more than grade2
Water resistance No obvious chang
Drying time(ni moe than hour) Surface 2
5.reference to construction
1.The two parts should be mixed according to proper percentage and the amount needed and thoroughly mixed before using while the mixture should be used up within 8 hours.
2.The tools for consruction should be dry and clean while the surface to be covered should be clean and dry without acid or alkali.
3.The thinner should be Qirui thinner and aviod using alkyd solvent as thinner.
4.Be isolated from water,acid,aclkali,ackyd etc. in the process of mixing and painting because part two is sensitive to react with them.The remaining of part two should be tighly closed to aviod plasticizing.
5.Paint the finish after the primer naturally drying.Spray and brush are all acceptable. Couple with paint Glass phosphorus films while the construction temperature should ba above 5¡æ.
|