Specifications: 1.components:The paint is made of epoxy, conduction powder, addictives etc..The paint isduoble
components which are supplied in two individual packages according
proepr percentage (9:1)
2.Characteristics and functions: The can be painted on the surface of non-conductive materials
to enable it to condact and reduce the acceleration of static while it I
sapplicable to elctrics, electronics, avaition, chemicals, pirnting etc.
With good adhesion
and conduction.
3.Technical reference:
Exterior of film smooth
Adhesion grade 2
Flexibility 1mm
Impact durability 50kg/cm2
Surface resistivety 105-9
Drying time (surface) 2h
4.Reference t o construction
1.The paint is double-component package. Mix the paint according to proper percentages and amount
needed for current using to avoid wasting caused by plasticizing due to long time.
2.The surface to be covered should be clean without oil, dust, water or any other impurities beafore
spraying or brushing.
3.Use proper thinners to modulate the viscosity to construction viscosity and avoid using unproper
thinners.
|