Specifications: 1.components: The paint is two-part composition, as component part one is made of epoxy resin,
anti-rust paint, organic solvent swhile component part two is curing agent .
2.charateristics and functions: The gray paint enjoys strong adhesion, low water vapor permeability,
is a good shielding coating.If it is been supported it has excellent anti-corrosion
properties and is applicable to the bridge, containers and Harbor facilities steel
surface.
3.technical standars
Projects standards
Exterior color and appearance of film smoth
Flexibility 1mm
Fineness 60um
Impact durability 50kg/cm2
Adhesion grade 2
Drying time (hard dry ) 24h
4.refernce to construction:
1.The paint should be thoroughly mixed according to the amount needed to avoid waste and rested for 10 mins before using.Use proper thinner to modulate the viscosity if it is too stick.
2.time between two paintings: Paint for the second times in 24 hours (room temperature) after the previous painting.
3:The paint can be painted on epoxy zinc or epoxy resion primers.Properly dilute the paint if you want to paint another thin film.
4.accessory:with epoxy paint , acrylic polyurethane varnish, lacquer chlorinated rubber, chlorosulfonated polyethylene, etc. are all acceptable.
|