Specifications: 1.Components:The paint is made of epoxy, organic solvent, additctives , phosphorylation etc. as part one
while curing agent as part two.The two parts are supplied in two respactively packages.
2.Charateristics: The paint enloys high performance of anticorrosion, mechanical properties, good adhesion,
strong conductivity and cathodic protection,and can be used for workshop without affecting
welding performance as anti-rust paint.
3.Functions:It is used for bridges, ships, offshore oil drilling platforms, sandblasted Harbor equipment and all
kinds the substrate. Generally, one kg can brush around 5 -6 ŠO with about 30um of each film.
4.technical standards:
Projects standards
Exterior color and appearance of fim gray and smooth
Flexibility 1 mm
Impact durability 50 kg/cm
Adhesion grade 2
Salt water resistance no rust within a week
Drying time (hard dry) 24h
5.reference to construction:
a)the substrate surface should be sandblastinged or shot peening derusting to no sand, no iron pills to dust, no oil and footprints
b)The paint can be sprayed, Brush or Roll Coating. Excessive viscosity can be dedicated to construction viscosity by proper thinner> Please avoid using unproper thinners
c)The paint should be toroughly mixed and rested for 10 mins before using. Stir the mixture constantly in the process of using t avoid precipitation of zinc powder.The mixture should be spent up within 6 hours to avoid waste caused by plasticizing due to long time
|