Specifications: 1.components: The paint is made of epoxy, plasticiz,mixted solvent etc. as component one ,while epoxy
curing agent as component two. These two components are supplied in two respectively packages.
2.charateristics and functions: The paint enjoys excellent adhesion ,
easy drying in room temperatureŁ¬few
corrosion to mentals, good waterproof,
moisture resistance and is applied to
the surfance of Al-Mg as primer.
3.technical standards
projects standards
appearance of film transparentable without impurities
viscosity 60-80
hardness 0.5
impact durability 50 kg/cm2
flexiblity 1mm
adhesion grade 2
water resistance no change within 24 hours
4.refernce to construction:
1.The substrate should be clean without oil or impurities.Mix the two parts thoroughly before using and modulate the viscosity by proper thinners before spraying or brushing.The mixed paint should be used up within 8 hours to avoid waste caused by plasticizing due to long time.
2.Use proper thinner to modulate the viscosity to the needed one and avoid using unproper thinners,
|