Specifications: 1.components:The paint is made of epoxy, plasticiz,mixted solvent etc. as part one ,while epoxy curing
agent as part two. These two parts are supplied in two respectively packages.
2.charateristics and functions: The paint enjoy excellent adhesion , dry in room temperature and few
corrosion to mentals, good water proof, moisture resistance and can be
applied to the surfance of Al-Mg as primer.
3.technical standards
projects standards
appearance of film transparentable without impurities
dring time(hard dry) 24 h
hardness 0.5
impact durability 50 kg/cm2
flexiblity 1mm
water resistance(24) no change
4.refernce to construction:
The substrate should be cleaned without oil or impurities.Mix the two parts thoroughly before using and modulate the viscosity by proper thinners before spraying or brushing.The mixed paint should be used up within 6 hours to avoid waste caused by plasticizing due to long time.Use proper thinne r to modulate the viscosity.
|