Specifications: 1.Components: The paint is made of epoxy, pigments, fillers, flourescent powder etc.. And mianly used for advertisements, roads and other marks for coating.
2.Charateristics:The paint’s film is dry in room temperature and smoothand it will release the abosrded energy into beyond-heat-radiation visiable light in case of being stimulated. Meanwhile it enjoys good adhesion and machncal properties.
3.Technical reference
Projects standards
Viscosity 30s
Flexibilty 1mm
Solid contents 50%
Impact durability 50 kg/cm2
Hardness 0.5
Water resistance (24h) no change
Drying time surface 2 h
4.Reference to construction:
1.The surface to be covered should be clean without oil, rust or dust while the construction environment should be clean with t he facilities of ventilation and air equipment etc. to ensure the quality of construction.
2. paintin gmethod: brush or spray
3. Thorouhgly mix the paint and use proper thinner to dilute the viscity.
4. Paint the primer when surface to covered is cleaned and do not brush the finish untill the primer is hard dry
|