Specifications: 1.Components: The paint is made of isocyanuric poly ester adduct and polyester, epoxy resin, organic solvent etc. as part one while curing agent as part two.These two parts are supplied in tewo respectively packages.
2.Charateristics: The paint enjoys good adhesion, hard film, bright gloss, excellent water resistance, moisture resistance, acid resistance, akali resistance, solvent resistance, chemical resistance and fungous resitance etc..
3.Fuctions: The paint is applicable to the interior wall of oil tanks,chemical apparatus, equipments as anti-corrosion coating.
4.reference to construction:
1These The two parts should be thoroughly mixed according to amount and percentage needed and introduction while the mixture should be used within 8hours.
2The application should be clean and dry without acild acakli or moisture while the the surface to be coverd shoule be clean and dry wihtout acid or acakli.
3Use proper thinner aupplied by our company and avoid using ackyd thinner.
4For part two is senstive to react with waterand acid, please be isoluted from water, acid, alkali and alcohol exposure in the process of using. Use proper thinner to dilute the viscosity. The remaining component part two must be tightly closed to avoid plasticizing.
5The paint can dry at room temperature and can be used 7 days after hard drying. Both spray and brush are acceptable.
|