Specifications: 1.Components: The paint is made of butyl rubber, stannous chloride, alkyl phenol - formaldehyde resin,
perchlorethylene varnish materials, toluene and so on.
2.Charateristics and functions: The paint has excellent oxidation acid etched resistance to ensure the mills
have stable qualified etching ratio and clean cut.After chemical milling, the
protective layer is easily removed by hand while the mental under protective
layer is free from corrosion.It is mainly used for milled stainless steel, aluminum
alloy etc. as temporary protective layer.
3.Technical reference
Projects standards
Viscosity 60-90 s
Solid contents 20+_ 1%
Etching ratio 0.7-0.8
Corrosion resistance no foaming,spiling or infultraton on the film while the no corrosion to the non
mechine layer under protective layer.
4.Reference to construction: Thoroughly mix the paint before using to avoid influent the construction quality.Only when previou layer is hard dry can paint next paints.Total thickness of film should be 0.1-0.15 mm.The paint can immediate use without thinners for its storage stability. Keep good ventilation during construction.
|