Specifications: 1.components:The paint is made of chlorinated rubber, retardants, polymer resins, fillers and organic
solvent as part one while curing agent as part two. These two prats are supplied respectively
according to proper percentage.
2.Characteristics and functions:The paint enjoys bright and hard film, good adhesion, waterproof,
weatherability, chemical-cprrosion resistance and can be applicable
to all kinds of equipments and metal things as decorative and protective coating.
3.technical reference:
projects standards
exterior color and appearance of fim smooth
viscosity 60-70s
fineness 30-40 um
adhesion grade 2
flexibilty 1mm
impact durability 50kg.cm
water resistance(48h) no change
petric resistance (24h) no foaming or spiling
drying time (surface) 2h
4.Reference to construction:
1.The substrate should be clean without oil, dust, water or impurities.
2.Both spray and brushing are all acceptable. Mix the two parts according to proper percentages and use exclusive thinners to modulate the viscosity.
3.Mix the paint according to the amount needed to avoid wasting caused by plasticzing due to long time.
|