Specifications: 1,Composion; the first part of paint is made of hydroxy acrylic resins with gring of pigments, fillers,catalytics etc.
While the second one is are the curing agent. They are supplied in two packages respectly.
2,Characteristics: the paint can dry at room temperature, enjoying ecellent performance of high adhesion,
excellent mechanical properties, gasoline-resistance, weather-durability, water resistance,
anti-mildew and anti-salt spray, resistance to hot and humidity and so on.
3,functions : It can couple with epoxy primer and is applicable to aviation and other industries.
4, technical indicats :
projects indicates
Surface of film smooth
Fineness(um ) no more than 20um
Solid contents(%) (part one) 45±2
Flexibillity(mm) no more than 1mm
Impact resistance(kg/cm) 50
Adhesion no more than 2
Drying time Surface(h) 2
Petric resistance (5h) No sticky or weak of the film
Steam resistance (72h) No obvious chang on the film
Heat resistance (150℃,48h) Meet standard color changing model
Salt-spary resistance (72h) No obvious chang on the film
5,reference for construction:
1.The two parts must be mixed according to the specification and the real demand while should be used within 6hours to avoid waste caused by plasticizing.
2.The surface to be covered should be clean and smooth while free from acidity,alkali or moister.
3.In order to fully mix the two parts ,please heating the mixture under moderate temperature for 10 seconds before spraying. If it is too viscosity, you should use exclusive thinner to dilute the viscosity properly.
4.The remaining of part two should be packaged closely and free from water petric etc. because it is sensitive to water, acidity and so on to avoid the waste caused by plasticizing.
|