Specifications: 1,compositions:this paint is supplied by two individual packages.Part one is made by the gring of hydroxy
acrylic resin pigments while part two is made of toluene diisocyanate and trimethylol propane
in addition to soluble arganic solvent.These two parts should be used according to proper
percentage.
2,characteristics: The paint has excellent mechanical properties, gasoline resistance, heat resistance, water
resistance, anti-mold, anti-salt spray, good hot and humid resisitance.
3,functions:It can be coupled with acrylic epoxy paint and are applicable to the industries of cars and aviation etc..
4,technical standards
projects indicates
Surface of the film Smoothy
Fineness No more than 20
Solid percentage(%) Part one 47-53
Flexibility(mm) No more than 1
Impact durability(kg/cm2 ) 50
Adhesion No more than 2
Time used for drying Surface(h) 2
Petric resistance (5h) No foaming or weak on the film
Steam resistance (72h) No obvious chang on the film
Heat resisitance (150℃,48h) Meet the standard model of color chang
Salt spay resistance(72h) No obvious chang on the surface of the film
5,reference to construction:
1, The surface to be covered must be free from salt ,dust, oil or foot prints.
2,spray,brust or roll coating are all acceptable.In case too stick please use proper diluent to dilute to the righ viscosity.
3,Please thoroughly mix the two parts before using and use it up within pot life to avoid waste caused by plasticizing due to long time.
|