Specifications: 1.components: The paint is made of epoxy, asphalt ,organic solvent etc. as part one while curing
agent as part two..
2.characteristics: The film enjoys strong hardness,abrasing resistance,chemical resistance, good waterproof,
and good adhesion to steel, cements etc..
3.functions: The paint can be applied to the interior wall of high-pressure pipe and chemical equipments for
anti-corrosion,and underwater structures, water transportation, underground water, gas pipeline,
Valve outside wall as protective coating.
4.Technical standars:
Projects standars
Exterior color and appearance of film smooth
Flexibility 2mm
Viscosity 80s
Impact durablity 40kg/cm2
Adhesion grade 2
Drying time (hard dry) 24 h
5.reference to construction:
1.these two parts should be thoroughly mixed according to proper percentage.
2.Both spray and brush are acceptable and please use proper thinner to modulate the viscoty.
3.The surface to be covered should be cleaned by sandblasting or blast descaling to ensure the surface has
no oil and dust while cement surface must Sesia siningensis. The mixed paint should be placed in cool
conditions with the warrency of 6 hours to aviod waste caused by plasticizing due to long time.
|