Specifications: 1.Components: the paint is made of epoxy ,pigments, organic solvent and curing agent and supplied in
two component packages.
2.chanrateristics and functions: The paint enjoys advantages of dry in room temperature, water resistance,
acid resistance, ackali resistance, petric resistancce, adhesion and serves
as good preservative paint being painted on febric glasses and Al-Mg alloy
apparatus.
3.Technical standars:
Projects Standarda
Exterior color and appearance of film smooth
Flexibility 1mm
Impact durability 50 kg/cm2
Adhesion grade 2
Salt water resistance no change
Drying time no more than 6h
4.Reference to construction
1.The surface to be covered should be thoroughly cleaned without any impurities. The paint shoul be mixed according to proper percentage and waited 10 mins for riping while use proper thinner to modulate the viscosity before brushing or praying.
2.The mixed paint should be used up within one day to aviod wasting cauesd by plasticizing due to long time.
3.It will be hard drying within 7 days in clean condition while needs 48 h before polishing (Only for these need supporting putty.)
|