Specifications: 1.Components:The paint is made of fabricglass exclusive primer epxy, fillers, pigments, addictives etc.
Trough grinding as part one while curing agent as part two.These two are supplied in
two packages according to proper percentages.
2.Charateristics and functions:The paint enjoys excellent mechanical properties , good adhesion to
fabricgalss, heat and humidity resistance, salp spray resistance,
weatherablity and decorative effects.
3.Reference to construction:
1.The two parts should be thoroughly mixed according to amount and percentage needed and introduction while the mixture should be used with the expiration to avoid wasting caused by plasticizin g due to long time.
2.the objects to be covered should be clean and dry without acild acakli or moisture.
3.In order tofully crosslinked these two parts, please ripen the mixture at room temperature for 10 minutes before spraying. If environment is dry and below 22 ° C without heating and drying facilities, the maturation time can properly extended.
4.For part t wo is senstive to react with waterand acid, please be isoluted from water, acid, alkali and alcohol exposure in the process of using. Use proper thinner to dilute the viscosity. The remaining component part two must be tightly closed to avoid plasticizing.
|