Specifications: 1.components:The paint is made of organic solvent which contains silicone, addictives that can tesistant to heat etc. as part one ,while curing agent as part two.
2.Charateristics:The paint can be dried in room temperature and enjoys exccellent heat resistance and mechanical properties.
3.functions:The paint is applicable to the surface of steel that under hot temperature and apparatus as coating for heat resistance preservation.
4.Technical reference:
Projects references
Exterior color and appearance of film smooth
Viscosity 50-80s
Flexibiity 1mm
Heat resistance(5h) few gloss loosing and color change on film
Impact durability 35kg/cm2
Drying time (hard dry) 24 hour
Adhesion no more than grade 2
Water resistancce vapour for 24 h) no change on the film
Heat resistance(being heated for 3 hours before impact durability testing) 15
5.reference to construction:
1. SteelĄ¯s surface to be covered should be polished by fine sandpaper to derust and toluene and other solvents to remove grease stain thoroughly. Finally, sandblast it until the surface becomes white gray.
2. The paint should be mixed according to the amount needede to avoid wasting caused by solidizing due to excessive amount.If there are some impurities please first filter the impurities.
3.Use heat paint exclusive thinner to modulate the paint when spraying while the filmĄ¯s thick shoud be amoung 20um to 30 um.
|