Specifications: 1.components:The paint is made of epoxy,pigments,fillers,organic solvents etc. as part two while curing agent as
part two.These two part is supplied in two packages.
2.Characteristics:The paint has excellent adhesion,strongly hard film,moisture resistance,oil-resistance,acid and ackli
rensistance, solvent resistance,chemical resistance and fungus resisance
3.Functions:Being supported by polyurethane skin primer it can be used as anti-corrosion for apparatus,
equipments, aircraft etc. in humid or chemical environment as protective coatings
4.Technical standards:
projects Standards
Exterior color and appearance of film smooth
flexibility No more than 1mm
Impact durabilitr (kg/cm2) 50
adhesion Grade 2
Water resistance No obvious change within 48 hours
Drying time(no more than) surface 2
hardness 0.6
Solid contains 65%
5.refernce to construction:
1.These two ars should be thoroughly mixed according to proer percentage and the anount needed before busing while the mixture should be used within 8 hours.
2, The tools used in construction should be clean and dry while the substrate should be clean and dry without acid or acakli
3, Use proper thinner to diluate the viscoty.Avoid using alkyd thinners.
4, In the process of lacquer and paint allocation,please be isoluted from water, acid, alkali and alcohol exposure as part two is sensitive to react with water, alcohol and other objects. The remaining component part two must be tightly closed to avoid plasticizing.
5, Both baking and self drying are acceptable while self- drying needs 7 days before using.Both brushing and spraying are all acceptable with the supporting of polyurethane finish.
|