Specifications: 1.Components:The paint is modified from epoxy paint, while its matching varieties are SY agent, LSW-2 Primer, coarsening - middle section, LSM- 2 varieties which are all two-component and are suppored using in construction.
2.Characteristics:The paint enjoys excellent seawater resistance, salt spay resistancce, heat and moisture resistance,anti-chloride, mechanical and physical properties,anti-corrosion etc..
3.Functions: The paint is applicable to the wet surface of reinforced concrete structures, underground tunnels, underneath coffers for anti-corrosion and waterproof protection
4.reference to construction:
1.surface processing:
1).Use water to wash to salt or other solventable impurities.
2).Use SSPC-SPI solvent to remove oil on the surface.
3).Use sandblasting to remove rust and oxide skin till ISOSa2.5(ssppc-So10) or even more.
4)Use high pressure air to blaste the dusts and other impurities.
5)Make sure the surface to be covered is dry and clean before constructing.
2.construction notes:
1.Thoroughly mix the paint according to the amont and percentage needed for current using and ripen it before constructing.
2.Use our exclusive thinner LSW-2 to modulate the paint.The amount of thinner should be no more than 5%.
3.Protect the coat from rain water, impacting and foot stepping after painting.
4.The construction environment should be strictly prohibited open flame, enhanced ventilation exhaust while construction should strictly comply with the safety and protection code.
|